Оформление чертежей в Creo Parametric 1.0 - 2011

Creation Time	March 21, 2025, 8:53 a.m.
Last Access Time	April 10, 2026, 4:20 a.m.
File Size	197.2 MB
Keywords	Оформление 2011 - 1 0 в Creo чертежей Parametric
Total Requests	576
Total Files	293
Magnet Link	Please wait ...
	Download (Magnet Link) Play (Watch Online)

drawing_files_creo/module_03/Conf_Models/clutch.asm 6.6 MB
drawing_files_creo/module_13/Large_Drawings/engine_cover.prt 5.3 MB
drawing_files_creo/module_10/Edit_Reports/air_filter_cover.prt 4.4 MB
drawing_files_creo/module_10/Bom_Balloons/air_filter_cover.prt 4.4 MB
drawing_files_creo/module_10/Creating_Reports/air_filter_cover.prt 4.4 MB
drawing_files_creo/module_13/Large_Drawings/air_filter_cover.prt 4.2 MB
drawing_files_creo/module_01/DrawingDevelopmentProcess/engine_cover.prt 3.9 MB
drawing_files_creo/module_13/Large_Drawings/flywheel.prt 3.9 MB
drawing_files_creo/module_13/Large_Drawings/gearbox_rear.prt 3.8 MB
Оформление чертежей в Creo Parametric 1.0 - 2011.djvu 3.7 MB
drawing_files_creo/module_01/DrawingDevelopmentProcess/cylinder.prt 3.6 MB
drawing_files_creo/module_13/Large_Drawings/cylinder.prt 3.5 MB
drawing_files_creo/module_01/DrawingDevelopmentProcess/air_filter_cover.prt 3.4 MB
drawing_files_creo/module_07/Custom_Sym_Palette/gearbox_front.prt 3.0 MB
drawing_files_creo/module_09/Hole_Tables/muffler.prt 3.0 MB
drawing_files_creo/module_02/Formats_Sheets/gearbox_front.prt 3.0 MB
drawing_files_creo/module_03/Hatching_Display/gearbox_front.prt 2.9 MB
drawing_files_creo/module_07/Surf_Fin_Symbols/gearbox_front.prt 2.9 MB
drawing_files_creo/module_13/Large_Drawings/gearbox_front.prt 2.8 MB
drawing_files_creo/module_01/DrawingDevelopmentProcess/flywheel.prt 2.8 MB
drawing_files_creo/module_03/Exploded_Views/flywheel.prt 2.8 MB
drawing_files_creo/module_13/Large_Drawings/muffler.prt 2.7 MB
drawing_files_creo/module_03/Hatching_Display/gearbox_rear.prt 2.7 MB
drawing_files_creo/module_01/DrawingDevelopmentProcess/gearbox_rear.prt 2.7 MB
drawing_files_creo/module_03/Exploded_Views/cylinder.prt 2.5 MB
drawing_files_creo/module_13/Large_Drawings/fuel_tank.prt 2.4 MB
drawing_files_creo/module_09/Hole_Tables/muffler.drw 2.2 MB
drawing_files_creo/module_13/Large_Drawings/recoil_cover.prt 2.2 MB
drawing_files_creo/module_03/Hatching_Display/reduction_gear_shaft.prt 2.2 MB
drawing_files_creo/module_01/DrawingDevelopmentProcess/reduction_gear_shaft.prt 2.2 MB
drawing_files_creo/module_01/DrawingDevelopmentProcess/eng_block_rear.prt 2.2 MB
drawing_files_creo/module_13/Large_Drawings/eng_block_rear.prt 2.2 MB
drawing_files_creo/module_03/Exploded_Views/eng_block_rear.prt 2.2 MB
drawing_files_creo/module_13/Large_Drawings/reduction_gear_shaft.prt 2.0 MB
drawing_files_creo/module_03/Hatching_Display/final_gear_shaft.prt 1.8 MB
drawing_files_creo/module_01/DrawingDevelopmentProcess/final_gear_shaft.prt 1.8 MB
drawing_files_creo/module_01/DrawingDevelopmentProcess/gearbox_front.prt 1.8 MB
drawing_files_creo/module_10/Part_Catalog/fuel_cap.prt 1.7 MB
drawing_files_creo/module_01/DrawingDevelopmentProcess/muffler.prt 1.7 MB
drawing_files_creo/module_13/Large_Drawings/final_gear_shaft.prt 1.7 MB
drawing_files_creo/module_01/DrawingDevelopmentProcess/eng_block_front.prt 1.6 MB
drawing_files_creo/module_13/Large_Drawings/eng_block_front.prt 1.6 MB
drawing_files_creo/module_01/DrawingDevelopmentProcess/fuel_tank.prt 1.5 MB
drawing_files_creo/module_13/Large_Drawings/drill.drw 1.4 MB
drawing_files_creo/module_01/DrawingDevelopmentProcess/recoil_cover.prt 1.4 MB
drawing_files_creo/module_01/DrawingDevelopmentProcess/clutch.asm 1.2 MB
drawing_files_creo/module_02/Drawing_Templates/clutch.asm 1.2 MB
drawing_files_creo/module_10/Edit_Reports/carburetor_plate.prt 1.1 MB
drawing_files_creo/module_10/Bom_Balloons/carburetor_plate.prt 1.1 MB
drawing_files_creo/module_10/Creating_Reports/carburetor_plate.prt 1.1 MB
drawing_files_creo/module_03/Exploded_Views/eng_block_front.prt 1.1 MB
drawing_files_creo/module_13/Large_Drawings/carburetor_plate.prt 1.1 MB
drawing_files_creo/module_04/Show_Erase/format_a2.frm 1.0 MB
drawing_files_creo/module_02/Drawing_Templates/clutch_spring.prt 1.0 MB
drawing_files_creo/module_03/Aux_Views/cylinder.prt 1.0 MB
drawing_files_creo/module_13/Large_Drawings/fuel_cap.prt 1.0 MB
drawing_files_creo/module_01/DrawingDevelopmentProcess/carburetor_plate.prt 1016.2 KB
drawing_files_creo/module_03/Projection_Views/cylinder.prt 967.4 KB
drawing_files_creo/module_07/Custom_Sym_Palette/draw_symbol_palette.drw 921.7 KB
drawing_files_creo/module_10/Edit_Reports/edit_reports.drw 909.1 KB
drawing_files_creo/module_10/Bom_Balloons/balloons.drw 898.3 KB
drawing_files_creo/module_10/Bom_Balloons/carburetor.prt 870.0 KB
drawing_files_creo/module_10/Edit_Reports/carburetor.prt 870.0 KB
drawing_files_creo/module_10/Creating_Reports/carburetor.prt 869.2 KB
drawing_files_creo/module_13/Large_Drawings/clutch_spring.prt 852.7 KB
drawing_files_creo/module_03/Conf_Models/clutch_spring.prt 852.4 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/clutch_spring.prt 852.3 KB
drawing_files_creo/module_13/Large_Drawings/standard_bit.prt 776.1 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/handle_grip.prt 768.1 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/carburetor.prt 761.6 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/chuck_collar.prt 756.8 KB
drawing_files_creo/module_13/Large_Drawings/ratchet.prt 728.8 KB
drawing_files_creo/module_08/Using_Layers/piston.prt 726.8 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/fuel_cap.prt 688.1 KB
drawing_files_creo/module_10/Part_Catalog/fuel_cap.drw.2 686.3 KB
drawing_files_creo/module_13/Large_Drawings/handle_grip.prt 684.9 KB
drawing_files_creo/module_06/Applying_Gtols/piston.prt 667.3 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/piston.prt 665.5 KB
drawing_files_creo/module_13/Large_Drawings/chuck_collar.prt 664.2 KB
drawing_files_creo/module_10/Creating_Reports/report.drw 659.2 KB
drawing_files_creo/module_13/Large_Drawings/piston.prt 645.6 KB
drawing_files_creo/module_13/Large_Drawings/handle_main.prt 635.5 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/standard_bit.prt 633.8 KB
drawing_files_creo/module_01/Drw_Ribbon/drw_ribbon.drw.2 624.2 KB
drawing_files_creo/module_12/Drawing_Env/piston.prt 605.6 KB
drawing_files_creo/module_09/Creating_Tables/connecting_rod.prt 599.0 KB
drawing_files_creo/module_03/View_Area/connecting_rod.prt 599.0 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/format_a2.frm.2 595.1 KB
drawing_files_creo/module_03/Gen_Views/piston.prt 593.4 KB
drawing_files_creo/module_03/Exploded_Views/piston.prt 593.4 KB
drawing_files_creo/module_06/Dimensional_Tolerances/piston.prt 593.4 KB
drawing_files_creo/module_03/Detailed_Views/piston.prt 593.4 KB
drawing_files_creo/module_13/Large_Drawings/drill.asm 581.0 KB
drawing_files_creo/module_13/Large_Drawings/drill_regen.drw 577.1 KB
drawing_files_creo/module_07/Custom_Sym_Palette/symbols.drw 574.9 KB
drawing_files_creo/module_08/Using_Layers/piston.drw 567.9 KB
drawing_files_creo/module_10/Edit_Reports/manifold.prt 555.9 KB
drawing_files_creo/module_10/Bom_Balloons/manifold.prt 555.9 KB
drawing_files_creo/module_10/Creating_Reports/manifold.prt 555.3 KB
drawing_files_creo/module_03/Section_Views/cylinder.prt 552.5 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/manifold.prt 531.1 KB
drawing_files_creo/module_03/Hatching_Display/crankshaft.prt 530.3 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/trigger.prt 521.8 KB
drawing_files_creo/module_13/Large_Drawings/manifold.prt 520.9 KB
drawing_files_creo/module_13/Large_Drawings/trigger.prt 512.5 KB
drawing_files_creo/module_12/Drawing_Env/piston.drw 509.0 KB
drawing_files_creo/module_06/Gtol_Refs/gtol_refs.drw.2 508.7 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/ratchet.prt 506.9 KB
drawing_files_creo/module_13/Large_Drawings/carburetor.prt 494.8 KB
drawing_files_creo/module_13/Large_Drawings/recoil_grip.prt 486.3 KB
drawing_files_creo/module_02/Drawing_Templates/format_a2.frm 484.9 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/a2_assembly_template1.drw.15 470.8 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/spark_plug.prt 469.7 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/a2_assembly_template.drw.15 469.4 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/coil.prt 463.0 KB
drawing_files_creo/module_13/Large_Drawings/clutch.asm 436.1 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/crankshaft.prt 417.5 KB
drawing_files_creo/module_03/Exploded_Views/crankshaft.prt 417.1 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/handle_main.prt 410.9 KB
drawing_files_creo/module_02/Drawing_Templates/template_asm_format_a2.drw 394.7 KB
drawing_files_creo/module_13/Large_Drawings/coil.prt 393.1 KB
drawing_files_creo/module_09/Creating_Tables/conn_rod.drw 389.0 KB
drawing_files_creo/module_03/Hatching_Display/primary_gear_shaft.prt 381.5 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/primary_gear_shaft.prt 381.3 KB
drawing_files_creo/module_13/Large_Drawings/handle_bracket.prt 371.0 KB
drawing_files_creo/module_13/Large_Drawings/crankshaft.prt 369.6 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/connecting_rod.prt 367.9 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/recoil_grip.prt 364.2 KB
drawing_files_creo/module_13/Large_Drawings/spark_plug.prt 364.0 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/chuck.prt 363.4 KB
drawing_files_creo/module_13/Large_Drawings/throttle_cable.prt 340.5 KB
drawing_files_creo/module_13/Large_Drawings/primary_gear_shaft.prt 333.2 KB
drawing_files_creo/module_13/Large_Drawings/chuck.prt 312.9 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/drill.asm 308.6 KB
drawing_files_creo/module_03/Conf_Sheets/clutch_shoe_l.prt 301.0 KB
drawing_files_creo/module_02/Drawing_Templates/clutch_shoe_l.prt 300.1 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/clutch_shoe_l.prt.3 278.7 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/handle_bracket.prt 265.8 KB
drawing_files_creo/module_10/Edit_Reports/carburetor.asm 257.2 KB
drawing_files_creo/module_03/Exploded_Views/connecting_rod.prt 254.4 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/throttle_cable.prt 251.1 KB
drawing_files_creo/module_10/Creating_Reports/carburetor.asm 248.6 KB
drawing_files_creo/module_03/Conf_Models/clutch_shoe_l.prt 248.4 KB
drawing_files_creo/module_13/Large_Drawings/handle_plate.prt 247.8 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/clutch_shoe_l.prt 243.4 KB
drawing_files_creo/module_13/Large_Drawings/connecting_rod.prt 224.5 KB
drawing_files_creo/module_13/Large_Drawings/clutch_shoe_l.prt 210.4 KB
drawing_files_creo/module_13/Large_Drawings/engine.asm 206.5 KB
drawing_files_creo/module_03/Conf_Models/clutch_shoe_r.prt 201.3 KB
drawing_files_creo/module_13/Large_Drawings/recoil_pulley.prt 201.3 KB
drawing_files_creo/module_03/Conf_Sheets/clutch_shoe_r.prt 196.3 KB
drawing_files_creo/module_13/Large_Drawings/drill_eng_orig.asm 196.0 KB
drawing_files_creo/module_03/Exploded_Views/engine.asm 193.7 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/handle_plate.prt 188.9 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/engine.asm 185.5 KB
drawing_files_creo/module_05/Adding_Notes/plate.prt 185.2 KB
drawing_files_creo/module_01/Drw_Ribbon/cylinder_bracket.prt 183.2 KB
drawing_files_creo/module_10/Edit_Reports/bolt.prt 176.4 KB
drawing_files_creo/module_10/Bom_Balloons/bolt.prt 176.4 KB
drawing_files_creo/module_02/Drawing_Templates/clutch_shoe_r.prt 176.1 KB
drawing_files_creo/module_10/Creating_Reports/bolt.prt 175.2 KB
drawing_files_creo/module_04/Dim_Display/plate.prt 171.7 KB
drawing_files_creo/module_13/Large_Drawings/carburetor.asm 171.5 KB
drawing_files_creo/module_04/Show_Erase/cylinder_bracket.prt 171.3 KB
drawing_files_creo/module_10/Bom_Balloons/carburetor.asm 169.4 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/fuel_line.prt 166.0 KB
drawing_files_creo/module_04/Show_Erase/angle_guide.prt 162.4 KB
drawing_files_creo/module_04/Show_Erase/shaft.prt 160.6 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/carburetor.asm 152.9 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/bolt.prt 152.2 KB
drawing_files_creo/module_03/Hatching_Display/gearbox.asm 149.0 KB
drawing_files_creo/module_13/Large_Drawings/fuel_line.prt 144.9 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/current_session.pro 143.1 KB
drawing_files_creo/module_06/Dimensional_Tolerances/current_session.pro 143.1 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/recoil_pulley.prt 139.0 KB
drawing_files_creo/module_04/Adjust_Dims/block.prt 131.9 KB
drawing_files_creo/module_06/Gtol_Refs/gtol_refs.prt.2 131.9 KB
drawing_files_creo/module_13/Large_Drawings/gearbox_chuck.asm 128.7 KB
drawing_files_creo/module_03/Section_Views/fixing_block.prt 122.9 KB
drawing_files_creo/module_13/Large_Drawings/handle_main.asm 122.2 KB
drawing_files_creo/module_05/Parameters_Notes/bracket.prt 120.5 KB
drawing_files_creo/module_03/Hatching_Display/bolt.prt 119.5 KB
drawing_files_creo/module_03/Exploded_Views/bolt.prt 119.1 KB
drawing_files_creo/module_13/Large_Drawings/handle_side.prt 117.0 KB
drawing_files_creo/module_03/Editing_Views/bolt.prt 115.3 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/eng_bearing.prt 115.0 KB
drawing_files_creo/module_13/Large_Drawings/fuel_tank.asm 113.7 KB
drawing_files_creo/module_13/Large_Drawings/bolt.prt 112.1 KB
drawing_files_creo/module_13/Large_Drawings/recoil.asm 111.1 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/clutch_shoe_r.prt 108.5 KB
drawing_files_creo/module_04/Ordinate_Dims/ordinate.prt 107.1 KB
drawing_files_creo/module_03/Exploded_Views/eng_bearing.prt 104.8 KB
drawing_files_creo/module_06/Dimensional_Tolerances/piston.drw 98.8 KB
drawing_files_creo/module_13/Large_Drawings/a2_size.frm 93.6 KB
drawing_files_creo/module_04/Driven_Dims/dimensions_example.prt 93.0 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/handle_main.asm 92.7 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/gearbox_chuck.asm 92.4 KB
drawing_files_creo/module_03/Conf_Models/clutch_body.prt 92.4 KB
drawing_files_creo/module_06/Dimensional_Tolerances/plate.prt 91.0 KB
drawing_files_creo/module_13/Large_Drawings/eng_bearing.prt 89.4 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/handle_side.prt 87.2 KB
drawing_files_creo/module_02/Drawing_Templates/clutch_body.prt 85.7 KB
drawing_files_creo/module_13/Large_Drawings/clutch_shoe_r.prt 85.4 KB
drawing_files_creo/module_06/Gtol_Refs/gtol_refs.prt 84.9 KB
drawing_files_creo/module_04/Adjust_Dims/adjust_dims.drw 82.6 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/clutch_body.prt 81.2 KB
drawing_files_creo/module_05/Parameters_Notes/bracket.drw 80.8 KB
drawing_files_creo/module_04/Driven_Dims/driven_dims.drw 78.3 KB
drawing_files_creo/module_13/Large_Drawings/clutch_body.prt 75.5 KB
drawing_files_creo/module_03/Editing_Views/clutch_body.prt 73.2 KB
drawing_files_creo/module_04/Dim_Display/plate.drw 72.7 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/fuel_tank.asm 71.0 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/recoil.asm 70.8 KB
drawing_files_creo/module_06/Applying_Gtols/piston.drw.6 64.5 KB
drawing_files_creo/module_04/Show_Erase/show_erase.drw 63.9 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/piston_ring.prt 63.2 KB
drawing_files_creo/module_03/Exploded_Views/piston_ring.prt 62.9 KB
drawing_files_creo/module_13/Large_Drawings/switch.prt 62.7 KB
drawing_files_creo/module_01/Drw_Ribbon/drw_ribbon.drw 61.2 KB
drawing_files_creo/module_13/Large_Drawings/piston.asm 58.6 KB
drawing_files_creo/module_13/Large_Drawings/crank.asm 56.8 KB
drawing_files_creo/module_13/Large_Drawings/drill_chuck.asm 54.1 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/piston_pin.prt 53.9 KB
drawing_files_creo/module_03/Exploded_Views/piston_pin.prt 53.6 KB
drawing_files_creo/module_13/Large_Drawings/piston_ring.prt 53.5 KB
drawing_files_creo/module_13/Large_Drawings/handle_side.asm 49.9 KB
drawing_files_creo/module_03/Exploded_Views/piston.asm 49.5 KB
drawing_files_creo/module_13/Large_Drawings/piston_pin.prt 48.4 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/drill_chuck.asm 48.0 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/switch.prt 47.9 KB
drawing_files_creo/module_02/Formats_Sheets/switch.prt 47.9 KB
drawing_files_creo/module_07/Surf_Fin_Symbols/gearbox.drw 46.3 KB
drawing_files_creo/module_03/Conf_Models/clutch.drw 46.0 KB
drawing_files_creo/module_03/Hatching_Display/gearbox_chuck_skel0001.prt 45.5 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/piston.asm 44.7 KB
drawing_files_creo/module_03/Conf_Sheets/sheets.drw 44.4 KB
drawing_files_creo/module_03/Exploded_Views/crank.asm 43.6 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/crank.asm 42.0 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/handle_side.asm 41.3 KB
drawing_files_creo/module_03/Aux_Views/auxiliary_views.drw 40.9 KB
drawing_files_creo/module_10/Part_Catalog/c_part.frm 40.0 KB
drawing_files_creo/module_03/Conf_Sheets/format_a3.frm 39.5 KB
drawing_files_creo/module_13/Large_Drawings/fuel_tank.drw 38.9 KB
drawing_files_creo/module_04/Ordinate_Dims/ordinate.drw 38.2 KB
drawing_files_creo/module_02/Creating_Templates/template.drw.1 37.4 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/a2_assembly_template.drw 37.4 KB
drawing_files_creo/module_06/Gtol_Refs/gtol_refs.drw 36.0 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/a2_part_template.drw 35.6 KB
drawing_files_creo/module_03/Hatching_Display/hatching.drw 33.6 KB
drawing_files_creo/module_02/Formats_Sheets/format_a2.frm 33.2 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/format_a2.frm 32.9 KB
drawing_files_creo/module_01/Drw_Ribbon/format_a2.frm 32.9 KB
drawing_files_creo/module_05/Adding_Notes/plate.drw 32.2 KB
drawing_files_creo/module_03/Projection_Views/proj_views.drw 31.3 KB
drawing_files_creo/module_07/Draft_Geometry/draft_data.drw.2 29.3 KB
drawing_files_creo/module_03/Gen_Views/gen_views.drw 27.8 KB
drawing_files_creo/module_03/View_Area/view_area.drw 27.3 KB
drawing_files_creo/module_03/Section_Views/section_views.drw 22.3 KB
drawing_files_creo/module_02/Drawing_Templates/template_part_format_a2.drw 20.9 KB
drawing_files_creo/module_03/Editing_Views/editing_views.drw 20.4 KB
drawing_files_creo/module_06/Dimensional_Tolerances/plate.drw 19.5 KB
drawing_files_creo/module_03/Exploded_Views/exp_views.drw 19.4 KB
drawing_files_creo/module_07/Creating_Symbols/symbols.drw.4 17.9 KB
drawing_files_creo/module_11/Formats/border_format_a2.igs 17.7 KB
drawing_files_creo/module_03/Detailed_Views/detail_views.drw 17.5 KB
drawing_files_creo/module_11/Formats/main_note_table.tbl 16.7 KB
drawing_files_creo/module_07/Custom_Sym_Palette/surftexture.sym 14.2 KB
drawing_files_creo/module_10/Edit_Reports/spec.tbl 14.1 KB
drawing_files_creo/module_10/Creating_Reports/spec.tbl 14.1 KB
drawing_files_creo/module_10/Bom_Balloons/spec.tbl 14.1 KB
drawing_files_creo/module_10/Edit_Reports/edited_bom.tbl 13.7 KB
drawing_files_creo/module_10/Creating_Reports/bom.tbl 11.6 KB
drawing_files_creo/module_10/Edit_Reports/bom.tbl 11.6 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/spec_table.tbl 10.3 KB
drawing_files_creo/config.pro 8.2 KB
drawing_files_creo/module_12/Drawing_Env/iso.dtl 6.7 KB
drawing_files_creo/module_12/Drawing_Env/jis.dtl 6.6 KB
drawing_files_creo/module_12/Drawing_Env/din.dtl 6.5 KB
drawing_files_creo/module_01/DrawingDevelopmentProcess/tolerance.dtl 4.8 KB
drawing_files_creo/module_07/Creating_Symbols/delta_finished.sym 4.6 KB
drawing_files_creo/config.win.2 4.2 KB
drawing_files_creo/module_10/Edit_Reports/Edit_Reports.idx 1.8 KB
drawing_files_creo/module_11/Formats/intf_in.log.1 1.6 KB
drawing_files_creo/module_04/Dim_Display/featinfo.inf 1.5 KB
drawing_files_creo/module_10/Part_Catalog/Part_Catalog.idx 1.1 KB
drawing_files_creo/module_04/Dim_Display/grv_ref_info.inf 1.1 KB
drawing_files_creo/module_13/Large_Drawings/Large_Drawings.idx 1022 bytes
drawing_files_creo/module_01/DrawingDevelopmentProcess/DrawingDevelopmentProcess.idx 1022 bytes
drawing_files_creo/module_10/Creating_Reports/Creating_Reports.idx 946 bytes
drawing_files_creo/module_10/Part_Catalog/fuel_cap.tst 464 bytes
drawing_files_creo/module_01/Drw_Ribbon/Drw_Ribbon.idx 262 bytes
drawing_files_creo/module_02/Creating_Templates/datafile.ers 128 bytes
drawing_files_creo/module_05/Adding_Notes/text_note.txt 108 bytes

Оформление чертежей в Creo Parametric 1.0 - 2011

File List

Download Torrent

Related Resources

Copyright Infringement