Build a Lego Helicopter in SolidWorks 3D CAD

Creation Time	Aug. 14, 2023, 2:02 p.m.
Last Access Time	Sept. 19, 2025, 7:43 a.m.
File Size	2.9 GB
Keywords	a Lego SolidWorks Build in Helicopter CAD 3D
Total Requests	1753
Total Files	146
Magnet Link	Please wait ...
	Download (Magnet Link) Play (Watch Online)

19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/2. Stage 22 Finishing the Helicopter and Adding Mechanical Mates.mp4 146.3 MB
10. Stage 9 Making the Cockpit Area/1. Create the Right Angle with Curve Part.mp4 136.5 MB
15. Stages 16 and 17 Making the Tail Rotor Section/2. Creating the Tail Fairing Part.mp4 132.7 MB
2. Stage 1 Building the Fuselage Base/2. Making the Right Angle Beam - Part 1.mp4 123.2 MB
16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/2. Creating the Tail Rotor Part.mp4 94.2 MB
12. Stage 11 Make the Upper Fuselage/2. Stage 11 Make the Upper Fuselage Section, and Troubleshooting.mp4 92.9 MB
2. Stage 1 Building the Fuselage Base/3. Making the Right Angle Beam - Part 2.mp4 91.4 MB
2. Stage 1 Building the Fuselage Base/6. Creating the first Subassembly.mp4 90.5 MB
14. Stages 13, 14 and 15 Building Up the Other Side of the Helicopter/1. Stages 13, 14 and 15 Building Up the Other Side of the Helicopter.mp4 89.5 MB
12. Stage 11 Make the Upper Fuselage/1. Create the Four Beam with Extension Part.mp4 84.9 MB
3. Stage 2 Expanding the Fuselage/2. Making the Right Angle Beam.mp4 84.6 MB
2. Stage 1 Building the Fuselage Base/1. Creating the Axle.mp4 82.5 MB
19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/1. Making the Main Rotor Blades.mp4 74.0 MB
13. Stage 12 Create the Main Rotor/2. Making the Axle Joint Part.mp4 70.1 MB
16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/3. Making the Half Bevel Gear Part.mp4 69.1 MB
1. Introduction/Instructions - Lego Helicopter 30465.pdf 67.1 MB
3. Stage 2 Expanding the Fuselage/4. Making Stage 2 - The Fuselage.mp4 66.8 MB
7. Stage 6 Adding the Tail Rotor Transmission/2. Making the Large Bush Part.mp4 65.5 MB
4. Stage 3 Adding to the Fuselage/2. Making the Cross Block Connector.mp4 65.4 MB
2. Stage 1 Building the Fuselage Base/4. Building the Friction Pin.mp4 62.5 MB
2. Stage 1 Building the Fuselage Base/5. Making the Pin with Bore.mp4 62.5 MB
17. Stage 20 Starting the Skids/1. Creating the Pin with Large Bush Part.mp4 62.2 MB
4. Stage 3 Adding to the Fuselage/3. Building Stage 3 - the Upper Fuselage.mp4 58.1 MB
11. Stage 10 Building Up the Cockpit Rear Section/3. Stage 10 Make the Main Rotor Hub Section.mp4 57.3 MB
13. Stage 12 Create the Main Rotor/3. Stage 12 Adding the Main Rotor Shaft.mp4 56.5 MB
4. Stage 3 Adding to the Fuselage/1. Creating the Long Pin Part.mp4 49.0 MB
5. Stage 4 Building the Tail Section/1. Building the 7-Long Beam.mp4 48.5 MB
7. Stage 6 Adding the Tail Rotor Transmission/4. Stage 6 Adding the Tail Rotor Transmission.mp4 47.2 MB
18. Stage 21 Finishing the Skids and Tail/2. Stage 21 Finishing the Skids and Tail.mp4 46.7 MB
7. Stage 6 Adding the Tail Rotor Transmission/3. Making the Bevel Gear.mp4 46.3 MB
16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/4. Stages 18 and 19 Adding the Tail Section.mp4 46.2 MB
18. Stage 21 Finishing the Skids and Tail/1. Making the Light Stud and Pin with Stud Parts.mp4 45.4 MB
11. Stage 10 Building Up the Cockpit Rear Section/1. Make the Three-Long Cross Block Part.mp4 42.9 MB
16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/1. Making the Pin with Axle Part.mp4 41.5 MB
8. Stage 7 Building Up the Helicopter Body/2. Stage 7 Building Up the Main Rotor Hub.mp4 39.5 MB
9. Stage 8 Adding the Helicopter's Nose Section/1. Stage 8 Adding the Helicopter's Nose Section.mp4 39.4 MB
17. Stage 20 Starting the Skids/2. Stage 20 Starting the Skids.mp4 35.9 MB
5. Stage 4 Building the Tail Section/3. Stage 4 Creating the Tail Boom.mp4 33.3 MB
15. Stages 16 and 17 Making the Tail Rotor Section/3. Stages 16 and 17 Making the Tail Section.mp4 31.9 MB
8. Stage 7 Building Up the Helicopter Body/1. Creating the Two Block with Axle Holes.mp4 30.1 MB
11. Stage 10 Building Up the Cockpit Rear Section/2. Create the Axle with Bore Part.mp4 29.5 MB
6. Stage 5 Adding the Tail Rotor Transmission Housing/1. Making the One-Sided Pin with Bore.mp4 28.9 MB
3. Stage 2 Expanding the Fuselage/3. Creating the Small Bush Part.mp4 28.0 MB
3. Stage 2 Expanding the Fuselage/1. Creating a Longer Axle Using Configurations.mp4 27.8 MB
15. Stages 16 and 17 Making the Tail Rotor Section/1. Making the 2-Long Axle Part.mp4 27.6 MB
6. Stage 5 Adding the Tail Rotor Transmission Housing/2. Stage 5 Adding the Tail Rotor Transmission Housing.mp4 25.1 MB
1. Introduction/1. Welcome to the Course.mp4 25.1 MB
5. Stage 4 Building the Tail Section/2. Making the 5-Long Beam.mp4 21.7 MB
10. Stage 9 Making the Cockpit Area/2. Stage 9 Create the Cockpit Side.mp4 13.7 MB
7. Stage 6 Adding the Tail Rotor Transmission/1. Creating the 9-Long Axle Part.mp4 13.0 MB
1. Introduction/2. How to Use This Course.mp4 12.1 MB
13. Stage 12 Create the Main Rotor/1. Creating the 7-Long Axle Part.mp4 10.2 MB
1. Introduction/Instructions - Lego Helicopter 30465.png 7.7 MB
1. Introduction/STEP File Assembly - Lego Helicopter - 30465.STEP 6.6 MB
1. Introduction/Main Assembly - Lego Helicopter - 30465.SLDASM 1.2 MB
1. Introduction/Corner Beam - 7x4x3 - 30465.SLDPRT 332.5 KB
1. Introduction/Stage 17 - Lego Helicopter - 30465.SLDASM 311.5 KB
1. Introduction/Axle - 30465.SLDPRT 294.4 KB
1. Introduction/Right Angle Beam with Curve - 5x3 - 30465.SLDPRT 291.5 KB
1. Introduction/Half Bevel Gear - 12 Tooth - 30465.SLDPRT 276.6 KB
1. Introduction/Stage 1 - Lego Helicopter - 30465.SLDASM 269.3 KB
1. Introduction/Stage 10 - Lego Helicopter - 30465.SLDASM 247.8 KB
1. Introduction/Beam - 7 Long - 30465.SLDPRT 247.4 KB
1. Introduction/Large Rotor Blade - 30465.SLDPRT 225.0 KB
1. Introduction/Bevel Gear - 12 Tooth - 30465.SLDPRT 219.9 KB
1. Introduction/Right Angle Beam - 4x2 - 30465.SLDPRT 210.0 KB
1. Introduction/4 Beam with Extension - 30465.SLDPRT 207.7 KB
1. Introduction/Tail Fairing - 30465.SLDPRT 201.5 KB
1. Introduction/Beam - 5 Long - 30465.SLDPRT 201.1 KB
1. Introduction/Axle Joint - 30465.SLDPRT 200.8 KB
1. Introduction/Pin with Large Bush- 30465.SLDPRT 191.3 KB
1. Introduction/Cross Block - 3 Long - 30465.SLDPRT 182.8 KB
1. Introduction/Friction Pin with Bore - 30465.SLDPRT 166.9 KB
1. Introduction/Stage 12- Lego Helicopter - 30465.SLDASM 165.3 KB
1. Introduction/Axle with Bore - 30465.SLDPRT 155.9 KB
1. Introduction/Stage 18 - Lego Helicopter - 30465.SLDASM 149.9 KB
1. Introduction/Stage 6 - Lego Helicopter - 30465.SLDASM 149.3 KB
1. Introduction/One Sided Friction Pin with Bore - 30465.SLDPRT 142.8 KB
1. Introduction/Friction Pin - 30465.SLDPRT 140.7 KB
1. Introduction/Long Friction Pin - 30465.SLDPRT 138.9 KB
1. Introduction/Cross Block - 30465.SLDPRT 134.4 KB
1. Introduction/Friction Pin with Long Axle - 30465.SLDPRT 133.2 KB
1. Introduction/Stage 20 - Lego Helicopter - 30465.SLDASM 133.1 KB
1. Introduction/Tail Rotor - 30465.SLDPRT 126.5 KB
1. Introduction/Stage 2 - Lego Helicopter - 30465.SLDASM 125.2 KB
1. Introduction/Stage 3 - Lego Helicopter - 30465.SLDASM 121.3 KB
1. Introduction/Large Bush - 30465.SLDPRT 116.8 KB
1. Introduction/Stage 7 - Lego Helicopter - 30465.SLDASM 113.2 KB
1. Introduction/Friction Pin with Stud - 30465.SLDPRT 107.8 KB
1. Introduction/Stage 8 - Lego Helicopter - 30465.SLDASM 104.9 KB
1. Introduction/Small Bush - 30565.SLDPRT 95.5 KB
1. Introduction/Stage 21 - Lego Helicopter - 30465.SLDASM 93.1 KB
1. Introduction/2 Beam with Axle Holes - 30465.SLDPRT 87.0 KB
1. Introduction/Light Stud - 30465.SLDPRT 65.2 KB
2. Stage 1 Building the Fuselage Base/2. Making the Right Angle Beam - Part 1.srt 24.4 KB
10. Stage 9 Making the Cockpit Area/1. Create the Right Angle with Curve Part.srt 23.8 KB
15. Stages 16 and 17 Making the Tail Rotor Section/2. Creating the Tail Fairing Part.srt 23.3 KB
16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/2. Creating the Tail Rotor Part.srt 20.1 KB
19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/2. Stage 22 Finishing the Helicopter and Adding Mechanical Mates.srt 18.6 KB
2. Stage 1 Building the Fuselage Base/1. Creating the Axle.srt 18.1 KB
2. Stage 1 Building the Fuselage Base/6. Creating the first Subassembly.srt 17.1 KB
3. Stage 2 Expanding the Fuselage/2. Making the Right Angle Beam.srt 15.7 KB
12. Stage 11 Make the Upper Fuselage/1. Create the Four Beam with Extension Part.srt 14.6 KB
2. Stage 1 Building the Fuselage Base/3. Making the Right Angle Beam - Part 2.srt 14.3 KB
12. Stage 11 Make the Upper Fuselage/2. Stage 11 Make the Upper Fuselage Section, and Troubleshooting.srt 13.3 KB
19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/1. Making the Main Rotor Blades.srt 12.8 KB
2. Stage 1 Building the Fuselage Base/4. Building the Friction Pin.srt 12.6 KB
2. Stage 1 Building the Fuselage Base/5. Making the Pin with Bore.srt 12.3 KB
17. Stage 20 Starting the Skids/1. Creating the Pin with Large Bush Part.srt 12.1 KB
3. Stage 2 Expanding the Fuselage/4. Making Stage 2 - The Fuselage.srt 11.9 KB
4. Stage 3 Adding to the Fuselage/2. Making the Cross Block Connector.srt 11.7 KB
7. Stage 6 Adding the Tail Rotor Transmission/2. Making the Large Bush Part.srt 11.7 KB
4. Stage 3 Adding to the Fuselage/1. Creating the Long Pin Part.srt 11.3 KB
13. Stage 12 Create the Main Rotor/2. Making the Axle Joint Part.srt 10.9 KB
14. Stages 13, 14 and 15 Building Up the Other Side of the Helicopter/1. Stages 13, 14 and 15 Building Up the Other Side of the Helicopter.srt 10.4 KB
16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/3. Making the Half Bevel Gear Part.srt 10.0 KB
4. Stage 3 Adding to the Fuselage/3. Building Stage 3 - the Upper Fuselage.srt 9.4 KB
11. Stage 10 Building Up the Cockpit Rear Section/3. Stage 10 Make the Main Rotor Hub Section.srt 8.6 KB
5. Stage 4 Building the Tail Section/1. Building the 7-Long Beam.srt 8.4 KB
18. Stage 21 Finishing the Skids and Tail/1. Making the Light Stud and Pin with Stud Parts.srt 8.3 KB
7. Stage 6 Adding the Tail Rotor Transmission/3. Making the Bevel Gear.srt 8.2 KB
3. Stage 2 Expanding the Fuselage/1. Creating a Longer Axle Using Configurations.srt 8.1 KB
13. Stage 12 Create the Main Rotor/3. Stage 12 Adding the Main Rotor Shaft.srt 8.1 KB
11. Stage 10 Building Up the Cockpit Rear Section/1. Make the Three-Long Cross Block Part.srt 7.6 KB
16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/4. Stages 18 and 19 Adding the Tail Section.srt 6.9 KB
16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/1. Making the Pin with Axle Part.srt 6.8 KB
6. Stage 5 Adding the Tail Rotor Transmission Housing/1. Making the One-Sided Pin with Bore.srt 6.6 KB
8. Stage 7 Building Up the Helicopter Body/2. Stage 7 Building Up the Main Rotor Hub.srt 6.5 KB
9. Stage 8 Adding the Helicopter's Nose Section/1. Stage 8 Adding the Helicopter's Nose Section.srt 6.2 KB
7. Stage 6 Adding the Tail Rotor Transmission/4. Stage 6 Adding the Tail Rotor Transmission.srt 6.2 KB
18. Stage 21 Finishing the Skids and Tail/2. Stage 21 Finishing the Skids and Tail.srt 6.0 KB
15. Stages 16 and 17 Making the Tail Rotor Section/1. Making the 2-Long Axle Part.srt 5.4 KB
8. Stage 7 Building Up the Helicopter Body/1. Creating the Two Block with Axle Holes.srt 4.9 KB
11. Stage 10 Building Up the Cockpit Rear Section/2. Create the Axle with Bore Part.srt 4.9 KB
17. Stage 20 Starting the Skids/2. Stage 20 Starting the Skids.srt 4.9 KB
1. Introduction/2. How to Use This Course.srt 4.8 KB
5. Stage 4 Building the Tail Section/3. Stage 4 Creating the Tail Boom.srt 4.8 KB
15. Stages 16 and 17 Making the Tail Rotor Section/3. Stages 16 and 17 Making the Tail Section.srt 4.6 KB
3. Stage 2 Expanding the Fuselage/3. Creating the Small Bush Part.srt 4.1 KB
6. Stage 5 Adding the Tail Rotor Transmission Housing/2. Stage 5 Adding the Tail Rotor Transmission Housing.srt 4.1 KB
5. Stage 4 Building the Tail Section/2. Making the 5-Long Beam.srt 4.0 KB
7. Stage 6 Adding the Tail Rotor Transmission/1. Creating the 9-Long Axle Part.srt 3.5 KB
13. Stage 12 Create the Main Rotor/1. Creating the 7-Long Axle Part.srt 2.1 KB
1. Introduction/1. Welcome to the Course.srt 2.0 KB
10. Stage 9 Making the Cockpit Area/2. Stage 9 Create the Cockpit Side.srt 1.8 KB
19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/3. Optional Assignment - Use Your New Lego Parts to Create a New Assembly.html 176 bytes

Build a Lego Helicopter in SolidWorks 3D CAD

File List

Download Torrent

Related Resources

Copyright Infringement